IfcAirToAirHeatRecoveryTypeEnum

Natural language names
enAir To Air Heat Recovery Type Enum
frEnumération des types d'échangeur air-air
Semantic definitions at the type
Type definition

Defines general types of air-to-air heat recovery devices.

HISTORY  New enumeration in IFC2x.
Enumeration definition
ConstantDescription
FIXEDPLATECOUNTERFLOWEXCHANGERHeat exchanger with moving parts and alternate layers of plates, separated and sealed from the exhaust and supply air stream passages with primary air entering at secondary air outlet location and exiting at secondary air inlet location.
FIXEDPLATECROSSFLOWEXCHANGERHeat exchanger with moving parts and alternate layers of plates, separated and sealed from the exhaust and supply air stream passages with secondary air flow in the direction perpendicular to primary air flow.
FIXEDPLATEPARALLELFLOWEXCHANGERHeat exchanger with moving parts and alternate layers of plates, separated and sealed from the exhaust and supply air stream passages with primary air entering at secondary air inlet location and exiting at secondary air outlet location.
ROTARYWHEELA heat wheel with a revolving cylinder filled with an air-permeable medium having a large internal surface area.
RUNAROUNDCOILLOOPA typical coil energy recovery loop places extended surface, finned tube water coils in the supply and exhaust airstreams of a building.
HEATPIPEA passive energy recovery device with a heat pipe divided into evaporator and condenser sections.
TWINTOWERENTHALPYRECOVERYLOOPSAn air-to-liquid, liquid-to-air enthalpy recovery system with a sorbent liquid circulates continuously between supply and exhaust airstreams, alternately contacting both airstreams directly in contactor towers.
THERMOSIPHONSEALEDTUBEHEATEXCHANGERSSealed systems that consist of an evaporator, a condenser, interconnecting piping, and an intermediate working fluid that is present in both liquid and vapor phases where the evaporator and the condenser are usually at opposite ends of a bundle of straight, individual thermosiphon tubes and the exhaust and supply ducts are adjacent to each other.
THERMOSIPHONCOILTYPEHEATEXCHANGERSSealed systems that consist of an evaporator, a condenser, interconnecting piping, and an intermediate working fluid that is present in both liquid and vapor phases where the evaporator and condensor coils are installed independently in the ducts and are interconnected by the working fluid piping.
USERDEFINEDUser-defined air to air heat recovery type.
NOTDEFINEDUndefined air to air heat recovery type.
Formal representations
XSD Specification
 <xs:simpleType name="IfcAirToAirHeatRecoveryTypeEnum">
  <xs:restriction base="xs:string">
   <xs:enumeration value="fixedplatecounterflowexchanger"/>
   <xs:enumeration value="fixedplatecrossflowexchanger"/>
   <xs:enumeration value="fixedplateparallelflowexchanger"/>
   <xs:enumeration value="rotarywheel"/>
   <xs:enumeration value="runaroundcoilloop"/>
   <xs:enumeration value="heatpipe"/>
   <xs:enumeration value="twintowerenthalpyrecoveryloops"/>
   <xs:enumeration value="thermosiphonsealedtubeheatexchangers"/>
   <xs:enumeration value="thermosiphoncoiltypeheatexchangers"/>
   <xs:enumeration value="userdefined"/>
   <xs:enumeration value="notdefined"/>
  </xs:restriction>
 </xs:simpleType>
EXPRESS Specification
TYPE IfcAirToAirHeatRecoveryTypeEnum = ENUMERATION OF (
 FIXEDPLATECOUNTERFLOWEXCHANGER,
 FIXEDPLATECROSSFLOWEXCHANGER,
 FIXEDPLATEPARALLELFLOWEXCHANGER,
 ROTARYWHEEL,
 RUNAROUNDCOILLOOP,
 HEATPIPE,
 TWINTOWERENTHALPYRECOVERYLOOPS,
 THERMOSIPHONSEALEDTUBEHEATEXCHANGERS,
 THERMOSIPHONCOILTYPEHEATEXCHANGERS,
 USERDEFINED,
 NOTDEFINED);
END_TYPE;

Link to EXPRESS-G diagram EXPRESS-G diagram

Link to this page  Link to this page