6.2.4.24 Pset_SpaceThermalDesign

PSET_TYPEDRIVENOVERRIDE / IfcSpace

Space Thermal Design: Space or zone HVAC design requirements. HISTORY: New property set in IFC Release 1.0 (Pset_SpaceHvacInformation); renamed to Pset_SpaceThermalDesign and revised in IFC2x2.
: 室内或いはゾーンの空調設計要求。履歴：IFC1.0の新PropertySet（Pset_SpaceHvacInformation)、：IFC2ｘ２にPset_SpaceThermalDesignと再定義された。

buildingSMART Data Dictionary

PSD-XML

NameTypeDescription
CoolingDesignAirflow P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Cooling Design AirflowThe air flowrate required during the peak cooling conditions.
冷房設計吸気量ピーク時の冷房条件で要求される給気量。
HeatingDesignAirflow P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Heating Design AirflowThe air flowrate required during the peak heating conditions, but could also be determined by minimum ventilation requirement or minimum air change requirements.
TotalSensibleHeatGain P_SINGLEVALUE / IfcPowerMeasure
Total Sensible Heat GainThe total sensible heat or energy gained by the space during the peak cooling conditions.
顕熱負荷の合計ピーク時の冷房条件で取得した顕熱或いはエネルギー。
현열 부하의 합계피크 냉방 조건에서 얻은 현열 또는 에너지.
TotalHeatGain P_SINGLEVALUE / IfcPowerMeasure
Total Heat GainThe total amount of heat or energy gained by the space at the time of the space's peak cooling conditions.
熱取得の合計ピーク時の室内最大冷房負荷時に取得した顕熱或いはエネルギー。
연 인수 금액최대의 실내 최대 냉방 부하 취득한 현열 또는 에너지.
TotalHeatLoss P_SINGLEVALUE / IfcPowerMeasure
Total Heat LossThe total amount of heat or energy lost by the space at the time of the space's peak heating conditions.
熱ロスの合計ピーク時の室内最大暖房負荷時に取得・損失した熱或いはエネルギー。
열 손실 합계최대의 실내 최대 난방 부하에 취득 · 손실 열 또는 에너지.
CoolingDryBulb P_SINGLEVALUE / IfcThermodynamicTemperatureMeasure
Cooling Dry BulbInside dry bulb temperature for cooling design.
冷房設計温度冷房設計における室内設計乾球温度。
냉방 설계온도냉방 설계의 실내 디자인 건구 온도
CoolingRelativeHumidity P_SINGLEVALUE / IfcPositiveRatioMeasure
Cooling Relative HumidityInside relative humidity for cooling design.
冷房設計相対湿度冷房設計における室内設計相対湿度。
냉방 설계 상대습도냉방 설계의 실내 디자인 상대 습도.
HeatingDryBulb P_SINGLEVALUE / IfcThermodynamicTemperatureMeasure
Heating Dry BulbInside dry bulb temperature for heating design.
暖房設計温度暖房設計における室内設計乾球温度。
난방 설계온도난방 설계의 실내 디자인 건구 온도
HeatingRelativeHumidity P_SINGLEVALUE / IfcPositiveRatioMeasure
Heating Relative HumidityInside relative humidity for heating design.
暖房設計相対湿度暖房設計における室内設計相対湿度。
난방 설계 상대습도난방 설계의 실내 디자인 상대 습도.
VentilationAirFlowrate P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Ventilation Air FlowrateVentilation outside air requirement for the space.
外気量必要外気量。
외기량필요 외기 량.
ExhaustAirFlowrate P_SINGLEVALUE / IfcVolumetricFlowRateMeasure
Exhaust Air FlowrateDesign exhaust air flow rate for the space.
排気量設計排気量。
배기량설계 배기량.
CeilingRAPlenum P_SINGLEVALUE / IfcBoolean
Ceiling RAPlenumCeiling plenum used for return air or not. TRUE = Yes, FALSE = No.
天井裏還気天井裏還気（リタンあり・なし）　TRUE=あり、FALSE=なし。
천장환원주의천장 환 기 (리탄있어 · 없음) TRUE = 있고 FALSE = 없음.
BoundaryAreaHeatLoss P_SINGLEVALUE / IfcHeatFluxDensityMeasure
Boundary Area Heat LossHeat loss per unit area for the boundary object. This is a design input value for use in the absence of calculated load data.
周辺関連設備の熱ロス単位面積ありた周辺関連設備の熱ロス。空調負荷計算値以外の設計設定値。
주변 관련 설비의 열 손실단위 면적이 주변 관련 설비의 열 손실. 공조 부하 계산 이외의 디자인 설정.

Link to this page  Link to this page