6.5.4.5 Pset_ProjectOrderMaintenanceWorkOrder

PSET_TYPEDRIVENOVERRIDE / IfcProjectOrder / MAINTENANCEWORKORDER

Project Order Maintenance Work Order: A MaintenanceWorkOrder is a detailed description of maintenance work that is to be performed. Note that the Scheduled Frequency property of the maintenance work order is used when the order is required as an instance of a scheduled work order.

buildingSMART Data Dictionary

PSD-XML

Name	Type	Description
ProductDescription	P_SINGLEVALUE / IfcText	Product Description A textual description of the products that require the work.
WorkTypeRequested	P_SINGLEVALUE / IfcText	Work Type Requested Work type requested in circumstances where there are categorizations of types of work task. It could be used to identify a remedial task, minor work task, electrical task etc.
ContractualType	P_SINGLEVALUE / IfcText	Contractual Type The contractual type of the work.
IfNotAccomplished	P_SINGLEVALUE / IfcText	If Not Accomplished Comments if the job is not accomplished.
MaintenaceType	P_ENUMERATEDVALUE / IfcLabel / PEnum_MaintenanceType	Maintenace Type Identifies the predefined types of maintenance that can be done from which the type that generates the maintenance work order may be set where: ConditionBased: generated as a result of the condition of an asset or artefact being less than a determined value. Corrective: generated as a result of an immediate and urgent need for maintenance action. PlannedCorrective: generated as a result of immediate corrective action being needed but with sufficient time available for the work order to be included in maintenance planning. Scheduled: generated as a result of a fixed, periodic maintenance requirement.
FaultPriorityType	P_ENUMERATEDVALUE / IfcLabel / PEnum_PriorityType	Fault Priority Type Identifies the predefined types of priority that can be assigned from which the type may be set where: High: action is required urgently. Medium: action can occur within a reasonable period of time. Low: action can occur when convenient.
LocationPriorityType	P_ENUMERATEDVALUE / IfcLabel / PEnum_PriorityType	Location Priority Type Identifies the predefined types of priority that can be assigned from which the type may be set where: High: action is required urgently. Medium: action can occur within a reasonable period of time. Low: action can occur when convenient.
ScheduledFrequency	P_SINGLEVALUE / IfcTimeMeasure	Scheduled Frequency The period of time between expected instantiations of a work order that may have been predefined.

  Link to this page