| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
 | Bauteiltyp | Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterst眉tzt. |
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. |
 | Reference | R茅f茅rence 脿 l'identifiant d'un type sp茅cifi茅 dans le contexte du projet (exemple : "type A1") pour d茅signer un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas g茅r茅s par le logiciel. |
 | 鍙傜収瑷樺彿 | 銇撱伄銉椼儹銈搞偋銈儓銇亰銇戙倠鍙傜収瑷樺彿(渚嬶細A-1)銆傚垎椤炪偝銉笺儔銇с伅銇亸鍐呴儴銇т娇鐢ㄣ仌銈屻倠銉椼儹銈搞偋銈儓銈裤偆銉椼仺銇椼仸浣跨敤銇曘倢銈嬨倐銇 |
 | 鍙傝冨彿 | 鑻ユ湭閲囩敤宸茬煡鐨勫垎绫荤郴缁燂紝鍒欒灞炴т负璇ラ」鐩腑璇ョ被鍨嬫瀯浠剁殑鍙傝冪紪鍙凤紙渚嬪锛岀被鍨婣-1锛夈 |
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Erg盲nzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Tempor盲r" (temporary) Bauteil und andere Bauelemente, die vor眉bergehend eingebaut werden (wie Abst眉tzungen, etc.) |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
| Statut | Statut de l'茅l茅ment, principalement utilis茅 dans les projets de r茅novation et de r茅habilitation. Le statut a pour valeur NOUVEAU pour un nouvel 茅l茅ment, EXISTANT pour un 茅l茅ment existant qui est conserv茅, DEMOLI pour un 茅l茅ment existant 脿 d茅molir et TEMPORAIRE pour un 茅l茅ment temporaire (comme une structure support provisoire). |
| 鐘舵厠 | 瑕佺礌锛堜富銇儶銉庛儥銉笺偡銉с兂銇俱仧銇敼淇儣銉偢銈с偗銉堛伀銇娿亜銇︼級銇姸鎱嬨 鐘舵厠銇併屾柊瑕(New)銆嶏紞鏂般仐銇忚拷鍔犮仌銈屻倠瑕佺礌銆傘屾棦瀛樸嶏紞瑕佺礌銇瓨鍦ㄣ仐銆併亱銇ゆ畫銈娿倐銇傘岀牬澹娿嶏紞瑕佺礌銇瓨鍦ㄣ仐銇熴亴銆佸粌妫勩仌銈屻倠銈傘伄銆傘屼竴鏅傜殑銆嶏紞涓鏅傜殑銇瓨鍦ㄣ仚銈嬭绱狅紙涓鏅傜殑銇偟銉濄兗銉堛仐銇︺亜銈嬫閫犮伄銈堛亞銇倐銇級銆 |
|
| NominalSupplyVoltage |
P_SINGLEVALUE
/
IfcElectricVoltageMeasure
|
| Nominal Supply Voltage | The nominal voltage of the supply. |
| 鍏О闆诲湩 | 闆绘簮銇叕绉伴浕鍦с |
|
| NominalSupplyVoltageOffset |
P_BOUNDEDVALUE
/
IfcElectricVoltageMeasure
|
| Nominal Supply Voltage Offset | The maximum and minimum allowed voltage of the supply e.g. boundaries of 380V/440V may be applied for a nominal voltage of 400V. |
| 銈儠銈汇儍銉堝叕绉伴浕鍦 | 闆绘簮銇渶澶уゃ仺鏈灏忚ū瀹归浕鍦с傘仧銇ㄣ亪銇380V/440V銇鐣屻伅400V銇叕绉伴浕鍦с伀閬╃敤銇曘倢銈嬨 |
|
| NominalFrequency |
P_SINGLEVALUE
/
IfcFrequencyMeasure
|
| Nominal Frequency | The nominal frequency of the supply. |
| 鍏О鍛ㄦ尝鏁 | 闆绘簮銇叕绉板懆娉㈡暟銆 |
|
| ConnectedConductorFunction |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ConductorFunctionEnum |
| Connected Conductor Function | Function of the conductors to which the load is connected. |
| 鎺ョ稓灏庝綋姗熻兘 | 灏庝綋銇鑳姐伅璨犺嵎銇屾帴缍氥仌銈屻仧鐘舵厠銆 |
|
| ShortCircuit3PoleMaximumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit3 Pole Maximum State | Maximum 3 pole short circuit current provided at the point of supply. |
| 3妤垫渶澶х煭绲￠浕娴 | 闆绘簮渚涚郸鏅傜偣銇3妤垫渶澶х煭绲￠浕娴併 |
|
| ShortCircuit3PolePowerFactorMaximumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit3 Pole Power Factor Maximum State | Power factor of the maximum 3 pole short circuit current provided at the point of supply. |
| 3妤垫渶澶х煭绲￠浕娴佸姏鐜 | 闆绘簮渚涚郸鏅傜偣銇3妤垫渶澶х煭绲￠浕娴佸姏鐜囥 |
|
| ShortCircuit2PoleMinimumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit2 Pole Minimum State | Minimum 2 pole short circuit current provided at the point of supply. |
| 2妤垫渶灏忕煭绲￠浕娴 | 闆绘簮渚涚郸鏅傜偣銇2妤垫渶灏忕煭绲￠浕娴併 |
|
| ShortCircuit2PolePowerFactorMinimumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit2 Pole Power Factor Minimum State | Power factor of the minimum 2 pole short circuit current provided at the point of supply. |
| 2妤垫渶灏忕煭绲￠浕娴佸姏鐜 | 闆绘簮渚涚郸鏅傜偣銇2妤垫渶灏忕煭绲￠浕娴佸姏鐜囥 |
|
| ShortCircuit1PoleMaximumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit1 Pole Maximum State | Maximum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
| 1妤垫渶澶х煭绲￠浕娴 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺N闁撱伄1妤垫渶澶х煭绲￠浕娴併 |
|
| ShortCircuit1PolePowerFactorMaximumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit1 Pole Power Factor Maximum State | Power factor of the maximum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
| 1妤垫渶澶х煭绲￠浕娴佸姏鐜 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺N闁撱伄1妤垫渶澶х煭绲￠浕娴佸姏鐜囥 |
|
| ShortCircuit1PoleMinimumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Short Circuit1 Pole Minimum State | Minimum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
| 1妤垫渶灏忕煭绲￠浕娴 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺N闁撱伄1妤垫渶灏忕煭绲￠浕娴併 |
|
| ShortCircuit1PolePowerFactorMinimumState |
P_SINGLEVALUE
/
IfcReal
|
| Short Circuit1 Pole Power Factor Minimum State | Power factor of the minimum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
| 1妤垫渶灏忕煭绲￠浕娴佸姏鐜 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺N闁撱伄1妤垫渶灏忕煭绲￠浕娴佸姏鐜囥 |
|
| EarthFault1PoleMaximumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Earth Fault1 Pole Maximum State | Maximum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
| 1妤垫渶澶у湴绲￠浕娴 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺PE/PEN闁撱伄1妤垫渶澶у湴绲￠浕娴併 |
|
| EarthFault1PolePowerFactorMaximumState |
P_SINGLEVALUE
/
IfcReal
|
| Earth Fault1 Pole Power Factor Maximum State | Power factor of the maximum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
| 1妤垫渶澶у湴绲￠浕娴佸姏鐜 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺PE/PEN闁撱伄1妤垫渶澶у湴绲￠浕娴佸姏鐜囥 |
|
| EarthFault1PoleMinimumState |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Earth Fault1 Pole Minimum State | Minimum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
| 1妤垫渶灏忓湴绲￠浕娴 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺PE/PEN闁撱伄1妤垫渶灏忓湴绲￠浕娴併 |
|
| EarthFault1PolePowerFactorMinimumState |
P_SINGLEVALUE
/
IfcReal
|
| Earth Fault1 Pole Power Factor Minimum State | Power factor of the minimum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
| 1妤垫渶灏忓湴绲￠浕娴佸姏鐜 | 闆绘簮渚涚郸鏅傜偣銇偣1鐩搞仺PE/PEN闁撱伄1妤垫渶灏忓湴绲￠浕娴佸姏鐜囥 |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page