| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
 | Bauteiltyp | Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterst眉tzt. |
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. |
 | Reference | R茅f茅rence 脿 l'identifiant d'un type sp茅cifi茅 dans le contexte du projet (exemple : "type A1") pour d茅signer un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas g茅r茅s par le logiciel. |
 | 鍙傜収瑷樺彿 | 銇撱伄銉椼儹銈搞偋銈儓銇亰銇戙倠鍙傜収瑷樺彿(渚嬶細A-1)銆傚垎椤炪偝銉笺儔銇с伅銇亸鍐呴儴銇т娇鐢ㄣ仌銈屻倠銉椼儹銈搞偋銈儓銈裤偆銉椼仺銇椼仸浣跨敤銇曘倢銈嬨倐銇 |
 | 鍙傝冨彿 | 鑻ユ湭閲囩敤宸茬煡鐨勫垎绫荤郴缁燂紝鍒欒灞炴т负璇ラ」鐩腑璇ョ被鍨嬫瀯浠剁殑鍙傝冪紪鍙凤紙渚嬪锛岀被鍨婣-1锛夈 |
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Erg盲nzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Tempor盲r" (temporary) Bauteil und andere Bauelemente, die vor眉bergehend eingebaut werden (wie Abst眉tzungen, etc.) |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
| Statut | Statut de l'茅l茅ment, principalement utilis茅 dans les projets de r茅novation et de r茅habilitation. Le statut a pour valeur NOUVEAU pour un nouvel 茅l茅ment, EXISTANT pour un 茅l茅ment existant qui est conserv茅, DEMOLI pour un 茅l茅ment existant 脿 d茅molir et TEMPORAIRE pour un 茅l茅ment temporaire (comme une structure support provisoire). |
| 鐘舵厠 | 瑕佺礌锛堜富銇儶銉庛儥銉笺偡銉с兂銇俱仧銇敼淇儣銉偢銈с偗銉堛伀銇娿亜銇︼級銇姸鎱嬨 鐘舵厠銇併屾柊瑕(New)銆嶏紞鏂般仐銇忚拷鍔犮仌銈屻倠瑕佺礌銆傘屾棦瀛樸嶏紞瑕佺礌銇瓨鍦ㄣ仐銆併亱銇ゆ畫銈娿倐銇傘岀牬澹娿嶏紞瑕佺礌銇瓨鍦ㄣ仐銇熴亴銆佸粌妫勩仌銈屻倠銈傘伄銆傘屼竴鏅傜殑銆嶏紞涓鏅傜殑銇瓨鍦ㄣ仚銈嬭绱狅紙涓鏅傜殑銇偟銉濄兗銉堛仐銇︺亜銈嬫閫犮伄銈堛亞銇倐銇級銆 |
|
| MaximumPowerOutput |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Maximum Power Output | The maximum output power rating of the engine. |
| 鏈澶у嚭鍔 | 銈ㄣ兂銈搞兂銇渶澶у嚭鍔涘畾鏍笺 |
|
| ElectricMotorEfficiency |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Electric Motor Efficiency | The ratio of output capacity to intake capacity. |
| 鍑哄姏鍔圭巼 | 鍑哄姏瀹归噺銇ㄥ叆鍔涘閲忋伄姣旂巼銆 |
|
| StartCurrentFactor |
P_SINGLEVALUE
/
IfcReal
|
| Start Current Factor | IEC. Start current factor defines how large the peak starting current will become on the engine. StartCurrentFactor is multiplied to NominalCurrent and to give the start current. |
| 濮嬪嫊闆绘祦淇傛暟 | 濮嬪嫊闆绘祦淇傛暟銇偍銉炽偢銉炽亴鍕曘亶濮嬨倎銇熸檪銇償銉笺偗濮嬪嫊闆绘祦銈掑畾缇┿傚鍕曢浕娴佷總鏁般伅瀹氭牸闆绘祦銇ㄥ鍕曟檪銇浕娴併倰鎺涖亼鍚堛倧銇涖仧銈傘伄銆 |
|
| StartingTime |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Starting Time | The time (in s) needed for the motor to reach its rated speed with its driven equipment attached, starting from standstill and at the nominal voltage applied at its terminals. |
| 濮嬪嫊鏅傞枔 | 銉€兗銈裤兗銇屽仠姝㈢姸鎱嬨亱銈夊畾鏍奸浕鍦с倰鍗板姞銇楀畾鏍奸熷害銇埌閬斻仚銈嬨伨銇с伀蹇呰銇檪闁撱 |
|
| TeTime |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Te Time | The maximum time (in s) at which the motor could run with locked rotor when the motor is used in an EX-environment. The time indicates that a protective device should trip before this time when the starting current of the motor is slowing through the device. |
| 鏈澶ф檪闁 | 銉€兗銈裤兗銇孍X鐠板銇с儹銉笺偪銉笺儹銉冦偗銇曘倢銇︿娇鐢ㄣ亶銈嬫渶澶ф檪闁撱
銉€兗銈裤兗濮嬪嫊闆绘祦銇屾鍣ㄣ倰浠嬨仐銇︽笡閫熴仐銇︺亜銈嬫檪闁撱倛銈婂墠銇繚璀疯缃仹鍋滄銇欍倠鏅傞枔銈掔ず銇欍 |
|
| LockedRotorCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Locked Rotor Current | Input current when a motor armature is energized but not rotating. |
| 鎷樻潫銉兗銈块浕娴 | 銉€兗銈裤兗銇浕姗熷瓙銇浕鍦с倰鍗板姞銇椼儹銉笺偪銇屽洖銇ｃ仸銇勩仾銇勬檪銇叆鍔涢浕娴併 |
|
| MotorEnclosureType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_MotorEnclosureType |
| Motor Enclosure Type | A list of the available types of motor enclosure from which that required may be selected. |
| 銉€兗銈裤兗淇濊妲嬮 | 銉€兗銈裤兗銇繀瑕併仾绛愪綋銈掍娇鐢ㄥ彲鑳姐仾銈裤偆銉椼伄銉偣銉堛亱銈夐伕鎶炪 |
|
| FrameSize |
P_SINGLEVALUE
/
IfcLabel
|
| Frame Size | Designation of the frame size according to the named range of frame sizes designated at the place of use or according to a given standard. |
| 銉曘儸銉笺儬銈点偆銈 | 銉曘儸銉笺儬銈点偆銈恒伄鎰忓懗銇屽疅闅涖伄澶с亶銇曘倰琛ㄧず銇椼仸銇勩倠銇亱銆佽鏍艰〃瑷樸仾銇亱銈掓寚瀹氥 |
|
| IsGuarded |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Guarded | Indication of whether the motor enclosure is guarded (= TRUE) or not (= FALSE). |
| 淇濊 | 銉€兗銈裤兗銇瓙浣撱亴瀹堛倝銈屻仸銇勩倠銇嬨仼銇嗐亱銈掔ず銇欍 |
|
| HasPartWinding |
P_SINGLEVALUE
/
IfcBoolean
|
| Has Part Winding | Indication of whether the motor is single speed, i.e. has a single winding (= FALSE) or multi-speed i.e.has part winding (= TRUE) . |
| 宸荤窔銆 | 銉€兗銈裤亴鍗樹竴銇熷害銇с亗銈嬨亱銇┿亞銇嬨倰绀恒仚銆備緥銇堛伆銆佸崢宸荤窔銆併優銉儊銈广償銉笺儔銆佸垎鍓插坊绶氥 |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page