| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
 | Bauteiltyp | Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterst眉tzt. |
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. |
 | Reference | R茅f茅rence 脿 l'identifiant d'un type sp茅cifi茅 dans le contexte du projet (exemple : "type A1") pour d茅signer un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas g茅r茅s par le logiciel. |
 | 鍙傜収瑷樺彿 | 銇撱伄銉椼儹銈搞偋銈儓銇亰銇戙倠鍙傜収瑷樺彿(渚嬶細A-1)銆傚垎椤炪偝銉笺儔銇с伅銇亸鍐呴儴銇т娇鐢ㄣ仌銈屻倠銉椼儹銈搞偋銈儓銈裤偆銉椼仺銇椼仸浣跨敤銇曘倢銈嬨倐銇 |
 | 鍙傝冨彿 | 鑻ユ湭閲囩敤宸茬煡鐨勫垎绫荤郴缁燂紝鍒欒灞炴т负璇ラ」鐩腑璇ョ被鍨嬫瀯浠剁殑鍙傝冪紪鍙凤紙渚嬪锛岀被鍨婣-1锛夈 |
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Erg盲nzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Tempor盲r" (temporary) Bauteil und andere Bauelemente, die vor眉bergehend eingebaut werden (wie Abst眉tzungen, etc.) |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
| Statut | Statut de l'茅l茅ment, principalement utilis茅 dans les projets de r茅novation et de r茅habilitation. Le statut a pour valeur NOUVEAU pour un nouvel 茅l茅ment, EXISTANT pour un 茅l茅ment existant qui est conserv茅, DEMOLI pour un 茅l茅ment existant 脿 d茅molir et TEMPORAIRE pour un 茅l茅ment temporaire (comme une structure support provisoire). |
| 鐘舵厠 | 瑕佺礌锛堜富銇儶銉庛儥銉笺偡銉с兂銇俱仧銇敼淇儣銉偢銈с偗銉堛伀銇娿亜銇︼級銇姸鎱嬨 鐘舵厠銇併屾柊瑕(New)銆嶏紞鏂般仐銇忚拷鍔犮仌銈屻倠瑕佺礌銆傘屾棦瀛樸嶏紞瑕佺礌銇瓨鍦ㄣ仐銆併亱銇ゆ畫銈娿倐銇傘岀牬澹娿嶏紞瑕佺礌銇瓨鍦ㄣ仐銇熴亴銆佸粌妫勩仌銈屻倠銈傘伄銆傘屼竴鏅傜殑銆嶏紞涓鏅傜殑銇瓨鍦ㄣ仚銈嬭绱狅紙涓鏅傜殑銇偟銉濄兗銉堛仐銇︺亜銈嬫閫犮伄銈堛亞銇倐銇級銆 |
|
| MotorDriveType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_FanMotorConnectionType |
| Motor Drive Type | Motor drive type:
DIRECTDRIVE: Direct drive.
BELTDRIVE: Belt drive.
COUPLING: Coupling.
OTHER: Other type of motor drive.
UNKNOWN: Unknown motor drive type. |
| 銉€兗銈裤兗椐嗗嫊绋 | 銉€兗銈裤兗椐嗗嫊绋
DIRECTDRIVE: 銉銈ゃ儸銈儓銉夈儵銈ゃ儢
BELTDRIVE: 銉欍儷銉堛儔銉┿偆銉
COUPLING: 銈儍銉椼儶銉炽偘
OTHER: 銇濄伄浠 |
|
| CapacityControlType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_FanCapacityControlType |
| Capacity Control Type | InletVane: Control by adjusting inlet vane.
VariableSpeedDrive: Control by variable speed drive.
BladePitchAngle: Control by adjusting blade pitch angle.
TwoSpeed: Control by switch between high and low speed.
DischargeDamper: Control by modulating discharge damper. |
| 瀹归噺鍒跺尽鏂瑰紡 | InletVane: 銈ゃ兂銉儍銉堛儥銉笺兂
VariableSpeedDrive: 澶夐熼鍕
BladePitchAngle: 缇芥牴銉斻儍銉佸埗寰
TwoSpeed: 浜岄熷埗寰
DischargeDamper: 鍚愬嚭銉銉炽儜鍒跺尽 |
|
| OperationTemperatureRange |
P_BOUNDEDVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Operation Temperature Range | Allowable operation ambient air temperature range. |
| 鍕曚綔娓╁害绡勫洸 | 瑷卞鍕曚綔鍛ㄥ洸娓╁害绡勫洸 |
|
| NominalAirFlowRate |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Nominal Air Flow Rate | Nominal air flow rate. |
| 瑷▓棰ㄩ噺 | 瑷▓棰ㄩ噺 |
|
| NominalTotalPressure |
P_SINGLEVALUE
/
IfcPressureMeasure
|
| Nominal Total Pressure | Nominal total pressure rise across the fan. |
| 瑷▓鍏ㄥ湩 | 銉曘偂銉炽仹銇ō瑷堝叏鍦т笂鏄 |
|
| NominalStaticPressure |
P_SINGLEVALUE
/
IfcPressureMeasure
|
| Nominal Static Pressure | The static pressure within the air stream that the fan must overcome to insure designed circulation of air. |
| 瑷▓闈欏湩 | 瑷▓绌烘皸寰挵閲忋倰淇濊銇欍倠銇熴倎銇儠銈°兂銇屽厠鏈嶃仐銇亼銈屻伆銇倝銇亜姘楁祦涓伄闈欏湩 |
|
| NominalRotationSpeed |
P_SINGLEVALUE
/
IfcRotationalFrequencyMeasure
|
| Nominal Rotation Speed | Nominal fan wheel speed. |
| 瑷▓鍥炶虎閫熷害 | 瑷▓銉涖偆銉笺儷閫熷害 |
|
| NominalPowerRate |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Nominal Power Rate | Nominal fan power rate. |
| 瑷▓鍕曞姏 | 瑷▓鍕曞姏 |
|
| OperationalCriteria |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Operational Criteria | Time of operation at maximum operational ambient air temperature. |
| 鍕曚綔鐠板 | 鏈澶у嫊浣滃懆鍥叉俯搴︺仹銇嫊浣溿伄鏅傞枔 |
|
| PressureCurve |
P_TABLEVALUE
/
IfcVolumetricFlowRateMeasure
/
IfcPressureMeasure
|
| Pressure Curve | Pressure rise = f (flow rate). |
|
| EfficiencyCurve |
P_TABLEVALUE
/
IfcVolumetricFlowRateMeasure
/
IfcNormalisedRatioMeasure
|
| Efficiency Curve | Fan efficiency =f (flow rate). |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page