7.4.4.46 Pset_ProtectiveDeviceBreakerUnitTypeMCB

PSET_TYPEDRIVENOVERRIDE / IfcProtectiveDevice / CIRCUITBREAKER

Natural language names
Protective Device Breaker Unit Type MCB
Properties

buildingSMART Data Dictionary

PSD-XML

NameTypeDescription
PowerLoss P_SINGLEVALUE / IfcPowerMeasure
Power LossThe power loss in [W] per pole of the MCB when the nominal current is flowing through the MCB.
電力損失定格電流がMCBに流れている時のMCBの極当たりの電力損失[W]。
VoltageLevel P_ENUMERATEDVALUE / IfcLabel / PEnum_VoltageLevels
Voltage LevelThe voltage levels for which the data of the instance is valid. More than one value may be selected in the enumeration.
電圧レベル電圧レベルを選択。
NominalCurrents P_LISTVALUE / IfcElectricCurrentMeasure
Nominal CurrentsA set of nominal currents in [A] for which the data of this instance is valid. At least one value shall be provided. Any value in the set shall not exceed the value of the UltimateRatedCurrent associated with the same breaker unit.
定格電流定格電流[A]を少なくても1つ値をセットしなければならない。 セット内の任意の値の値を超えてはならない。 定格電流は、同じブレーカ部に関連付けられている。
ICU60947 P_SINGLEVALUE / IfcElectricCurrentMeasure
ICU60947The ultimate breaking capacity in [A] for an MCB tested in accordance with the IEC 60947 series.
定格限界短絡遮断容量IECの60947シリーズに基づいてテストされたMCBの定格限界短絡遮断容量を[A]で設定。
ICS60947 P_SINGLEVALUE / IfcElectricCurrentMeasure
ICS60947The service breaking capacity in [A] for an MCB tested in accordance with the IEC 60947 series.
定格使用短絡遮断容量IECの60947シリーズに基づいてテストされたMCBの定格使用短絡遮断容量を[A]で設定。
ICN60898 P_SINGLEVALUE / IfcElectricCurrentMeasure
ICN60898The nominal breaking capacity in [A] for an MCB tested in accordance with the IEC 60898 series.
ICN60898IECの60898シリーズに基づいてテストされたMCBの定格遮断容量を[A]で設定。
ICS60898 P_SINGLEVALUE / IfcElectricCurrentMeasure
ICS60898The service breaking capacity in [A] for an MCB tested in accordance with the IEC 60898 series.
ICS60898IECの60898シリーズに基づいてテストされたMCBの遮断使用容量を[A]で設定。

Link to this page  Link to this page