7.4.4.50 Pset_ProtectiveDeviceTrippingFunctionGCurve

PSET_TYPEDRIVENOVERRIDE / IfcProtectiveDeviceTrippingUnit

Natural language names
Protective Device Tripping Function GCurve
Properties

buildingSMART Data Dictionary

PSD-XML

NameTypeDescription
IsSelectable P_SINGLEVALUE / IfcBoolean
Is SelectableIndication whether the S-function can be switched off or not.
鍒囥倞鏇裤亪瑁呯疆銇 鈥淥N-OFF鈥濈姸鎱嬨倰闆绘皸鐨勮〃绀恒亴鍒囥倞鏇裤亪鍙兘銇嬨仼銇嗐亱銆
NominalCurrentAdjusted P_SINGLEVALUE / IfcBoolean
Nominal Current AdjustedAn indication if the tripping currents of the short time protection is related to the nominal current multiplied with the actual setting of the current adjustment, if any, of the long time protection part of the protective device, or not.
瀹氭牸瑾挎暣闆绘祦闆绘祦銇倛銇c仸銆佸嫊浣滄檪闁撱亴鐭亱銇嬨仯銇熴倞闀枫亱銇c仧銈娿仚銈嬨亱銇┿亞銇嬨
ExternalAdjusted P_SINGLEVALUE / IfcBoolean
External AdjustedAn indication if the ground fault protection may be adjusted according to an external current coil or not.
澶栭儴瑾挎暣澶栭儴瑾挎暣銇屽彲鑳姐亱銇┿亞銇嬨
ReleaseCurrent P_SINGLEVALUE / IfcElectricCurrentMeasure
Release CurrentThe release current in [x In] for the initial tripping of the S-function.
鏀惧嚭闆绘祦鏀惧嚭銇欍倠闆绘祦銇丼-function銇垵鏈熺壒鎬с
ReleaseTime P_SINGLEVALUE / IfcTimeMeasure
Release TimeThe release time in [s] for the initial tripping of the relevant part. This time indicates that for current lower than the indicated release current, the tripping time will be longer than the indicated release time. The value is given as a mean value.
鏀惧嚭鏅傞枔闁㈤c仚銈嬮儴鍒嗐伄鍒濇湡銉堛儶銉冦儣銇仧銈併伄[s]銇屾斁鍑烘檪闁撱 銇撱伄銉堛儶銉冦儣鏅傞枔銇併儶銉兗銈广伄闆绘祦銈堛倞銈備綆銇勯浕娴併伄鍫村悎銆佹寚瀹氥仌銈屻仧鍕曚綔鏅傞枔銈堛倞銈傞暦銇忋仾銈娿伨銇欍 鍊ゃ亴骞冲潎鍊ゃ仺銇椼仸涓庛亪銈夈倢銈嬨
CurrentTolerance1 P_SINGLEVALUE / IfcPositiveRatioMeasure
Current Tolerance1The tolerance for the current of time/current-curve in [%].
瑷卞闆绘祦1鏅傞枔/鐗规ф洸绶氥伄瑷卞绡勫洸銈抂锛匽銇ф寚瀹氥
CurrentToleranceLimit1 P_SINGLEVALUE / IfcTimeMeasure
Current Tolerance Limit1The time limit in [s] limiting the application of CurrentTolerance1, if any. If the value is set to 0, the value of the CurrentTolerance1 is valid for the whole time/current-curve.
瑷卞闆绘祦闄愮晫1瑷卞闆绘祦1銈掑埗闄愩仚銈嬫檪闁撳埗闄愩 鍊ゃ亴0銇牬鍚堛伅銆佸埗闄愩伅銇亜銆
CurrentTolerance2 P_SINGLEVALUE / IfcPositiveRatioMeasure
Current Tolerance2The tolerance for the current of time/current-curve in [%] valid for times above CurrentTolereanceLimit1.
瑷卞闆绘祦2[锛匽銇ф寚瀹氥仌銈屻仧鏅傞枔/鐗规ф洸绶氥伄瑷卞绡勫洸銇佷笂瑷樸伄瑷卞闆绘祦闄愮晫1銇檪闁撱仹鏈夊姽銇с仚銆
IsCurrentTolerancePositiveOnly P_SINGLEVALUE / IfcBoolean
Is Current Tolerance Positive OnlyIndication whether the value of CurrentTolerance1 is provided as a positive tolereance only or not. If not, the value is proved as a pluss/minus tolerance.
闆绘祦瑷卞鍊瑷卞闆绘祦闄愮晫1銇ゃ伄銇裤亱銇┿亞銇 涓婅銇с仾銇勫牬鍚堛侀浕娴佽ū瀹瑰ゃ伅銉椼儵銈/銉炪偆銉娿偣銇椼仧鍊ゃ
TimeTolerance1 P_SINGLEVALUE / IfcPositiveRatioMeasure
Time Tolerance1The tolerance for the time of time/current-curve in [%].
瑷卞鏅傞枔1[锛匽銇ф檪闁/鐗规ф洸绶氥伄瑷卞鏅傞枔銈掕ō瀹
TimeToleranceLimit1 P_SINGLEVALUE / IfcElectricCurrentMeasure
Time Tolerance Limit1The current limit in [x In] limiting the application of TimeTolerance1, if any. If the value is set to 0, the value of the TimeTolerance1 is valid for the whole time/current-curve.
瑷卞闄愮晫鏅傞枔1瑷卞鏅傞枔1銈掑埗闄愩仚銈嬮浕娴佸埗闄愬ゃ 鍊ゃ亴0銇牬鍚堛伅銆佸埗闄愩伅銇亜銆
TimeTolerance2 P_SINGLEVALUE / IfcPositiveRatioMeasure
Time Tolerance2The tolerance for the time of the time/current-curve in [%] valid for currents above TimeToleranceLimit1.
瑷卞鏅傞枔2[锛匽銇ф寚瀹氥仌銈屻仧鏅傞枔/鐗规ф洸绶氥伄瑷卞绡勫洸銇佷笂瑷樸伄瑷卞闆绘祦闄愮晫1銇浕娴併仹鏈夊姽銇с仚銆
IsTimeTolerancePositiveOnly P_SINGLEVALUE / IfcBoolean
Is Time Tolerance Positive OnlyIndication whether the value of TimeTolerance1 is provided as a positive tolereance only or not. If not, the value is proved as a pluss/minus tolerance.
鏅傞枔瑷卞鍊瑷卞鏅傞枔1銇ゃ伄銇裤亱銇┿亞銇 涓婅銇с仾銇勫牬鍚堛佹檪闁撹ū瀹瑰ゃ伅銆併儣銉┿偣/銉炪偆銉娿偣銇椼仧鍊ゃ
ReleaseCurrentI2tStart P_SINGLEVALUE / IfcElectricCurrentMeasure
Release Current I2t StartThe release current in [x In] for the start point of the I2t tripping curve of the G-function, if any.
I2t銇枊濮嬫斁娴侀浕娴G闁㈡暟銇壒鎬ф洸绶欼2t銇鐐筟x In]銇岄枊濮嬫斁娴侀浕娴併
ReleaseTimeI2tStart P_SINGLEVALUE / IfcTimeMeasure
Release Time I2t StartThe release time in [s] for the start point of the I2t tripping curve of the G-function, if any.
I2t銇枊濮嬫斁娴佹檪闁G闁㈡暟銇壒鎬ф洸绶欼2t銇鐐筟s]銇岄枊濮嬫斁娴佹檪闁撱
ReleaseCurrentI2tEnd P_SINGLEVALUE / IfcElectricCurrentMeasure
Release Current I2t EndThe release current in [x In] for the end point of the I2t tripping curve of the G-function, if any. The value of ReleaseCurrentI2tEnd shall be larger than ReleaseCurrentI2tStart.
I2t銇祩浜嗘斁娴侀浕娴G闁㈡暟銇甀2銇壒鎬ф洸绶氥伄銈ㄣ兂銉夈儩銈ゃ兂銉堛伄[s]銈掓斁娴侀浕娴併 I2t銇祩浜嗘斁娴侀浕娴併亴I2t銇枊濮嬫斁娴侀浕娴併倛銈娿倐浣庛亸銇椼仾銇戙倢銇般仾銈夈仾銇勩
ReleaseTimeI2tEnd P_SINGLEVALUE / IfcTimeMeasure
Release Time I2t EndThe release time in [s] for the end point of the I2 tripping curve of the G-function, if any. The value of ReleaseTimeI2tEnd shall be lower than ReleaseTimeI2tStart.
I2t銇祩浜嗘斁娴佹檪闁G闁㈡暟銇甀2銇壒鎬ф洸绶氥伄銈ㄣ兂銉夈儩銈ゃ兂銉堛伄[s]銈掓斁娴佹檪闁撱 I2t銇祩浜嗘斁娴侀浕娴佹檪闁撱亴I2t銇枊濮嬫斁娴佹檪闁撱倛銈娿倐浣庛亸銇椼仾銇戙倢銇般仾銈夈仾銇勩

Link to this page  Link to this page