Name | Type | Description |
IsSelectable |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Selectable | Indication whether the S-function can be switched off or not. |
| 鍒囥倞鏇裤亪 | 瑁呯疆銇 鈥淥N-OFF鈥濈姸鎱嬨倰闆绘皸鐨勮〃绀恒亴鍒囥倞鏇裤亪鍙兘銇嬨仼銇嗐亱銆 |
|
NominalCurrentAdjusted |
P_SINGLEVALUE
/
IfcBoolean
|
| Nominal Current Adjusted | An indication if the tripping currents of the short time protection is related to the nominal current multiplied with the actual setting of the current adjustment, if any, of the long time protection part of the protective device, or not. |
| 瀹氭牸瑾挎暣闆绘祦 | 闆绘祦銇倛銇c仸銆佸嫊浣滄檪闁撱亴鐭亱銇嬨仯銇熴倞闀枫亱銇c仧銈娿仚銈嬨亱銇┿亞銇嬨 |
|
ReleaseCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Release Current | The release current in [x In] for the initial tripping of the S-function. |
| 鏀惧嚭闆绘祦 | 鏀惧嚭銇欍倠闆绘祦銇丼-function銇垵鏈熺壒鎬с |
|
ReleaseTime |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Release Time | The release time in [s] for the initial tripping of the relevant part. This time indicates that for current lower than the indicated release current, the tripping time will be longer than the indicated release time. The value is given as a mean value. |
| 鏀惧嚭鏅傞枔 | 闁㈤c仚銈嬮儴鍒嗐伄鍒濇湡銉堛儶銉冦儣銇仧銈併伄[s]銇屾斁鍑烘檪闁撱
銇撱伄銉堛儶銉冦儣鏅傞枔銇併儶銉兗銈广伄闆绘祦銈堛倞銈備綆銇勯浕娴併伄鍫村悎銆佹寚瀹氥仌銈屻仧鍕曚綔鏅傞枔銈堛倞銈傞暦銇忋仾銈娿伨銇欍
鍊ゃ亴骞冲潎鍊ゃ仺銇椼仸涓庛亪銈夈倢銈嬨 |
|
CurrentTolerance1 |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Current Tolerance1 | The tolerance for the current of time/current-curve in [%]. |
| 瑷卞闆绘祦1 | 鏅傞枔/鐗规ф洸绶氥伄瑷卞绡勫洸銈抂锛匽銇ф寚瀹氥 |
|
CurrentToleranceLimit1 |
P_SINGLEVALUE
/
IfcTimeMeasure
|
| Current Tolerance Limit1 | The time limit in [s] limiting the application of CurrentTolerance1, if any. If the value is set to 0, the value of the CurrentTolerance1 is valid for the whole time/current-curve. |
| 瑷卞闆绘祦闄愮晫1 | 瑷卞闆绘祦1銈掑埗闄愩仚銈嬫檪闁撳埗闄愩
鍊ゃ亴0銇牬鍚堛伅銆佸埗闄愩伅銇亜銆 |
|
CurrentTolerance2 |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Current Tolerance2 | The tolerance for the current of time/current-curve in [%] valid for times above CurrentTolereanceLimit1. |
| 瑷卞闆绘祦2 | [锛匽銇ф寚瀹氥仌銈屻仧鏅傞枔/鐗规ф洸绶氥伄瑷卞绡勫洸銇佷笂瑷樸伄瑷卞闆绘祦闄愮晫1銇檪闁撱仹鏈夊姽銇с仚銆 |
|
IsCurrentTolerancePositiveOnly |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Current Tolerance Positive Only | Indication whether the value of CurrentTolerance1 is provided as a positive tolereance only or not. If not, the value is proved as a pluss/minus tolerance. |
| 闆绘祦瑷卞鍊 | 瑷卞闆绘祦闄愮晫1銇ゃ伄銇裤亱銇┿亞銇
涓婅銇с仾銇勫牬鍚堛侀浕娴佽ū瀹瑰ゃ伅銉椼儵銈/銉炪偆銉娿偣銇椼仧鍊ゃ |
|
TimeTolerance1 |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Time Tolerance1 | The tolerance for the time of time/current-curve in [%]. |
| 瑷卞鏅傞枔1 | [锛匽銇ф檪闁/鐗规ф洸绶氥伄瑷卞鏅傞枔銈掕ō瀹氥 |
|
TimeToleranceLimit1 |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Time Tolerance Limit1 | The current limit in [x In] limiting the application of TimeTolerance1, if any. If the value is set to 0, the value of the TimeTolerance1 is valid for the whole time/current-curve. |
| 瑷卞闄愮晫鏅傞枔1 | 瑷卞鏅傞枔1銈掑埗闄愩仚銈嬮浕娴佸埗闄愬ゃ
鍊ゃ亴0銇牬鍚堛伅銆佸埗闄愩伅銇亜銆 |
|
TimeTolerance2 |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Time Tolerance2 | The tolerance for the time of the time/current-curve in [%] valid for currents above TimeToleranceLimit1. |
| 瑷卞鏅傞枔2 | [锛匽銇ф寚瀹氥仌銈屻仧鏅傞枔/鐗规ф洸绶氥伄瑷卞绡勫洸銇佷笂瑷樸伄瑷卞闆绘祦闄愮晫1銇浕娴併仹鏈夊姽銇с仚銆 |
|
IsTimeTolerancePositiveOnly |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Time Tolerance Positive Only | Indication whether the value of TimeTolerance1 is provided as a positive tolereance only or not. If not, the value is proved as a pluss/minus tolerance. |
| 鏅傞枔瑷卞鍊 | 瑷卞鏅傞枔1銇ゃ伄銇裤亱銇┿亞銇
涓婅銇с仾銇勫牬鍚堛佹檪闁撹ū瀹瑰ゃ伅銆併儣銉┿偣/銉炪偆銉娿偣銇椼仧鍊ゃ |
|
MaxAdjustmentX_ICS |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Max Adjustment X_ ICS | Provides the maximum setting value for the available current adjustment in relation to the
Ics breaking capacity of the protection device of which the actual tripping unit is a part of. The value is not asserted unless the instantaneous time protection is. |
| 鏈澶ц鏁碭_ICS | 瀹熼殯銇儓銉儍銉楄缃伄涓閮ㄣ仹銇傘倠淇濊瑁呯疆銇甀cs 閬柇瀹归噺銇枹閫c仐銇﹀埄鐢ㄥ彲鑳姐仾闆绘祦銇渶澶ц鏁村ゃ |
|
IsOffWhenSFunctionOn |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Off When SFunction On | Indication whether the I-function is automatically switched off when the S-function is switched on. |
|