Pset_ProtectiveDeviceTrippingUnitTimeAdjustment

Natural language names

	Protective Device Tripping Unit Time Adjustment

Properties

Name

Type

Description

AdjustmentValueType

	Adjustment Value Type	The type of adjustment value that is applied through the property set. This determines the properties that should be asserted (see below).
	調整値の型	調整値のタイプを設定。

AdjustmentRange

P_BOUNDEDVALUE / IfcTimeMeasure

	Adjustment Range	Upper and lower time adjustment limits for an AdjustmentValueType = RANGE. Note that this property should not have a value for an AdjustmentValueType = LIST.
	調整範囲	時間調整の範囲の上限値と下限値を設定。一覧表ではもっていない事を注意。

AdjustmentRangeStepValue

P_SINGLEVALUE / IfcTimeMeasure

	Adjustment Range Step Value	Step value of time adjustment for an AdjustmentValueType = RANGE. Note that this property should not have a value for an AdjustmentValueType = LIST.
	調整範囲のステップ値	時間調整の範囲をステップ値を設定。一覧表ではもっていない事を注意。

AdjustmentValues

P_LISTVALUE / IfcTimeMeasure

	Adjustment Values	A list of time adjustment values that may be applied to a tripping unit for an AdjustmentValueType = LIST. A minimum of 1 and a maximum of 16 adjustment values may be specified. Note that this property should not have a value for an AdjustmentValueType = RANGE.
	調整値	時間調整値を１から16で設定。範囲では、ない事を注意。

AdjustmentDesignation

P_SINGLEVALUE / IfcLabel

	Adjustment Designation	The desgnation on the device for the adjustment.
	調整の指定	調整する装置の指定。

CurrentForTimeDelay

P_SINGLEVALUE / IfcTimeMeasure

	Current For Time Delay	The tripping current in [x In] at which the time delay is specified. A value for this property should only be asserted for time delay of L-function, and for I2t of the S and G function.
	時延電流	時延[x]ののトリップ電流は、L関数の遅延時間、およびSとG関数のI2tを指定。

I2TApplicability

	I2 TApplicability	The applicability of the time adjustment related to the tripping function.
	I2Tの適用	トリップ機能の時延を求める時に適用する関数。