6.1.5.9 Qto_PlateBaseQuantities
6.1.5.9.1 Semantic definition
Base quantities that are common to the definition of all occurrences of plates.
6.1.5.9.2 Applicable entities
6.1.5.9.3 Properties
| Name | Data Type | Description | |
|---|---|---|---|
| Width | IfcQuantityLength |
The width of the object. Only given, if the object has constant thickness (prismatic). |
|
| Perimeter | IfcQuantityLength |
Perimeter of the object. Perimeter measured along the outer boundaries of the plate. Only given, if the plate is prismatic (constant thickness). |
|
| GrossArea | IfcQuantityArea |
Gross Area of the object. Openings, recesses, projections and cut-outs are not taken into account. Indicates the extruded area of the element. Only given, if the element is prismatic. |
|
| NetArea | IfcQuantityArea |
Total net area of the object. Openings, recesses and cut-outs are taken into account by subtraction, projections by addition. Indicates the extruded area of the object. Only given when prismatic. |
|
| GrossVolume | IfcQuantityVolume |
Total gross volume of the object. Openings, recesses, enclosed objects and projections are not taken into account. |
|
| NetVolume | IfcQuantityVolume |
Total net volume of the object, taking into account possible processing features (cut-out's, etc.) or openings and recesses. Total net volume of the plate. Openings and recesses are taken into account by subtraction, projections by addition. |
|
| GrossWeight | IfcQuantityWeight |
Total Gross Weight of the object without any add-on parts and not taking into account possible processing features (cut-out's, etc.) or openings and recesses. |
|
| NetWeight | IfcQuantityWeight |
Total net weight of the object without add-on parts, taking into account possible processing features (cut-out's, etc.) or openings and recesses. |