IfcQuantityLength

Natural language names
deMengenangabe - Länge
enQuantity Length
frQuantité de longueur
Change log
ItemSPFXMLChangeDescription
IFC2x3 to IFC4
    IfcQuantityLength
      FormulaADDED
Semantic definitions at the entity
Entity definition

IfcQuantityLength is a physical quantity that defines a derived length measure to provide an element's physical property. It is normally derived from the physical properties of the element under the specific measure rules given by a method of measurement.

EXAMPLE  A rafter within a roof construction may be measured according to its length (taking a common cross section into account). The actual size of the length depends on the method of measurement used.
HISTORY  New entity in IFC2x. It replaces the calcXxx attributes used in previous IFC Releases.
Attribute definitions
#AttributeTypeCardinalityDescription C
4LengthValueIfcLengthMeasure[1:1] Length measure value of this quantity.X
5FormulaIfcLabel[0:1] A formula by which the quantity has been calculated. It can be assigned in addition to the actual value of the quantity. Formulas could be mathematic calculations (like width x height), database links, or a combination. The formula is for informational purposes only. X
Formal Propositions
RuleDescription
WR21If a unit is given, the unit type shall be a length unit.
WR22A valid length quantity shall be greater than or equal to zero.
Inherited definitions from supertypes
Entity inheritance IfcPhysicalSimpleQuantity IfcPhysicalQuantity
Attribute inheritance
#AttributeTypeCardinalityDescriptionC
IfcPhysicalQuantity
1NameIfcLabel[1:1] Name of the element quantity or measure. The name attribute has to be made recognizable by further agreements.X
2DescriptionIfcText[0:1] Further explanation that might be given to the quantity.X
HasExternalReferencesIfcExternalReferenceRelationship
@RelatedResourceObjects
S[0:?]Reference to an external reference, e.g. library, classification, or document information, that is associated to the quantity. X
PartOfComplexIfcPhysicalComplexQuantity
@HasQuantities
S[0:1]Reference to a physical complex quantity in which the physical quantity may be contained.X
IfcPhysicalSimpleQuantity
3UnitIfcNamedUnit[0:1] Optional assignment of a unit. If no unit is given, then the global unit assignment, as established at the IfcProject, applies to the quantity measures.X
IfcQuantityLength
4LengthValueIfcLengthMeasure[1:1] Length measure value of this quantity.X
5FormulaIfcLabel[0:1] A formula by which the quantity has been calculated. It can be assigned in addition to the actual value of the quantity. Formulas could be mathematic calculations (like width x height), database links, or a combination. The formula is for informational purposes only. X
Formal representations
XSD Specification
 <xs:element name="IfcQuantityLength" type="ifc:IfcQuantityLength" substitutionGroup="ifc:IfcPhysicalSimpleQuantity" nillable="true"/>
 <xs:complexType name="IfcQuantityLength">
  <xs:complexContent>
   <xs:extension base="ifc:IfcPhysicalSimpleQuantity">
    <xs:attribute name="LengthValue" type="ifc:IfcLengthMeasure" use="optional"/>
    <xs:attribute name="Formula" type="ifc:IfcLabel" use="optional"/>
   </xs:extension>
  </xs:complexContent>
 </xs:complexType>
EXPRESS Specification
ENTITY IfcQuantityLength
 SUBTYPE OF (IfcPhysicalSimpleQuantity);
  LengthValue : IfcLengthMeasure;
  Formula : OPTIONAL IfcLabel;
 WHERE
  WR21 : NOT(EXISTS(SELF\IfcPhysicalSimpleQuantity.Unit)) OR (SELF\IfcPhysicalSimpleQuantity.Unit.UnitType = IfcUnitEnum.LENGTHUNIT);
  WR22 : LengthValue >= 0.;
END_ENTITY;

Link to EXPRESS-G diagram EXPRESS-G diagram

Link to this page  Link to this page