AudioSpeakerMode 音频扬声器模式

Enumeration

These are speaker types defined for use with AudioSettings.speakerMode.

这些被定义的扬声器类型是用于AudioSettings.speakerMode。

Your project's default speaker mode can be set in the Audiomanager through Edit->Project Settings->Audio.

项目默认扬声器模式可以通过Audio manager设置，在菜单Edit->Project Settings->Audio

参见： AudioSettings

Values值

• Raw
  Channel count is unaffected.
  通道数量不受影响。
• Mono
  Channel count is set to 1. The speakers are monaural.
  通道数设置为1。扬声器是单声道。
• Stereo
  Channel count is set to 2. The speakers are stereo. This is the editor default.
  通道数设置为2。扬声器是立体声。这是编辑器的默认。
• Quad
  Channel count is set to 4. 4 speaker setup. This includes front left, front right, rear left, rear right.
  通道数设置为4。四声道扬声器。包含前左，前右，后左，后右。
• Surround
  Channel count is set to 5. 5 speaker setup. This includes front left, front right, center, rear left, rear right.
  通道数设置为5。五声道扬声器。包含前左，前右，中间，后左，后右。
• Mode5point1
  Channel count is set to 6. 5.1 speaker setup. This includes front left, front right, center, rear left, rear right and a subwoofer.
  通道数设置为6。5.1声道扬声器。包含前左，前右，中间，后左，后右，低音炮。
• Mode7point1
  Channel count is set to 8. 7.1 speaker setup. This includes front left, front right, center, rear left, rear right, side left, side right and a subwoofer.
  通道数设置为8。7.1声道扬声器。包含前左，前右，中间，后左，后右，侧左，侧右和一个低音炮。
• Prologic
  Channel count is set to 2. Stereo output, but data is encoded in a way that is picked up by a Prologic/Prologic2 decoder and split into a 5.1 speaker setup.
  通道数设置为2。立体声输出，但是数据被编码，通过Prologic/Prologic2解码器和分为5.1扬声器设置。