7.5.2.3 IfcAirToAirHeatRecoveryTypeEnum
7.5.2.3.1 Semantic definition
Defines general types of air-to-air heat recovery devices.
7.5.2.3.2 Type values
| Type | Description |
|---|---|
FIXEDPLATECOUNTERFLOWEXCHANGER
|
Heat exchanger with moving parts and alternate layers of plates, separated and sealed from the exhaust and supply air stream passages with primary air entering at secondary air outlet location and exiting at secondary air inlet location. |
FIXEDPLATECROSSFLOWEXCHANGER
|
Heat exchanger with moving parts and alternate layers of plates, separated and sealed from the exhaust and supply air stream passages with secondary air flow in the direction perpendicular to primary air flow. |
FIXEDPLATEPARALLELFLOWEXCHANGER
|
Heat exchanger with moving parts and alternate layers of plates, separated and sealed from the exhaust and supply air stream passages with primary air entering at secondary air inlet location and exiting at secondary air outlet location. |
HEATPIPE
|
A passive energy recovery device with a heat pipe divided into evaporator and condenser sections. |
ROTARYWHEEL
|
A heat wheel with a revolving cylinder filled with an air-permeable medium having a large internal surface area. |
RUNAROUNDCOILLOOP
|
A typical coil energy recovery loop places extended surface, finned tube water coils in the supply and exhaust airstreams of a building. |
THERMOSIPHONCOILTYPEHEATEXCHANGERS
|
Sealed systems that consist of an evaporator, a condenser, interconnecting piping, and an intermediate working fluid that is present in both liquid and vapor phases where the evaporator and condensor coils are installed independently in the ducts and are interconnected by the working fluid piping. |
THERMOSIPHONSEALEDTUBEHEATEXCHANGERS
|
Sealed systems that consist of an evaporator, a condenser, interconnecting piping, and an intermediate working fluid that is present in both liquid and vapor phases where the evaporator and the condenser are usually at opposite ends of a bundle of straight, individual thermosiphon tubes and the exhaust and supply ducts are adjacent to each other. |
TWINTOWERENTHALPYRECOVERYLOOPS
|
An air-to-liquid, liquid-to-air enthalpy recovery system with a sorbent liquid circulates continuously between supply and exhaust airstreams, alternately contacting both airstreams directly in contactor towers. |
USERDEFINED
|
User-defined air to air heat recovery type. |
NOTDEFINED
|
Undefined air to air heat recovery type. |
7.5.2.3.3 Formal representation
TYPE IfcAirToAirHeatRecoveryTypeEnum = ENUMERATION OF
(FIXEDPLATECOUNTERFLOWEXCHANGER
,FIXEDPLATECROSSFLOWEXCHANGER
,FIXEDPLATEPARALLELFLOWEXCHANGER
,HEATPIPE
,ROTARYWHEEL
,RUNAROUNDCOILLOOP
,THERMOSIPHONCOILTYPEHEATEXCHANGERS
,THERMOSIPHONSEALEDTUBEHEATEXCHANGERS
,TWINTOWERENTHALPYRECOVERYLOOPS
,USERDEFINED
,NOTDEFINED);
END_TYPE;