7.5.4.5 Pset_AirTerminalTypeCommon
7.5.4.5.1 Semantic definition
Air terminal type common attributes. SoundLevel attribute deleted in IFC2x2 Pset Addendum: Use IfcSoundProperties instead.
7.5.4.5.2 Applicable entities
7.5.4.5.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| Reference | IfcPropertySingleValue | IfcIdentifier |
Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used. |
|
| Status | IfcPropertyEnumeratedValue | PEnum_ElementStatus |
Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
|
| AirTerminalShape | IfcPropertyEnumeratedValue | PEnum_AirTerminalShape |
Shape of the air terminal. Slot is typically a long narrow supply device with an aspect ratio generally greater than 10 to 1. |
|
| FaceType | IfcPropertyEnumeratedValue | PEnum_AirTerminalFaceType |
Identifies how the terminal face of an AirTerminal is constructed. |
|
| SlotWidth | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Slot width. |
|
| SlotLength | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Slot length. |
|
| NumberOfSlots | IfcPropertySingleValue | IfcCountMeasure |
Indicates the number of slots. |
|
| FlowPattern | IfcPropertyEnumeratedValue | PEnum_AirTerminalFlowPattern |
Flow pattern. |
|
| AirFlowRateRange | IfcPropertyBoundedValue | IfcVolumetricFlowRateMeasure |
Possible range of airflow that can be delivered. |
|
| TemperatureRange | IfcPropertyBoundedValue | IfcThermodynamicTemperatureMeasure |
Allowable maximum and minimum temperature. Temperature range within which the air terminal is designed to operate. |
|
| DischargeDirection | IfcPropertyEnumeratedValue | PEnum_AirTerminalDischargeDirection |
Discharge direction of the air terminal. Parallel: discharges parallel to mounting surface designed so that flow attaches to the surface. Perpendicular: discharges away from mounting surface. Adjustable: both parallel and perpendicular discharge. |
|
| ThrowLength | IfcPropertySingleValue | IfcLengthMeasure |
The horizontal or vertical axial distance an airstream travels after leaving an AirTerminal before the maximum stream velocity is reduced to a specified terminal velocity under isothermal conditions at the upper value of the AirFlowrateRange. |
|
| AirDiffusionPerformanceIndex | IfcPropertySingleValue | IfcReal |
The Air Diffusion Performance Index (ADPI) is used for cooling mode conditions. If several measurements of air velocity and air temperature are made throughout the occupied zone of a space, the ADPI is the percentage of locations where measurements were taken that meet the specifications for effective draft temperature and air velocity. |
|
| FinishType | IfcPropertyEnumeratedValue | PEnum_AirTerminalFinishType |
The type of finish for the air terminal. |
|
| FinishColour | IfcPropertySingleValue | IfcLabel |
No description available. |
|
| AirTerminalMountingType | IfcPropertyEnumeratedValue | PEnum_AirTerminalMountingType |
The way the air terminal is mounted to the ceiling, wall, etc. Surface: mounted to the surface of something (e.g., wall, duct, etc.). Flat flush: mounted flat and flush with a surface. Lay-in: mounted in a lay-in type ceiling (e.g., a dropped ceiling grid). |
|
| CoreType | IfcPropertyEnumeratedValue | PEnum_AirTerminalCoreType |
Identifies the way the core of the AirTerminal is constructed. |
|
| CoreSetHorizontal | IfcPropertySingleValue | IfcPlaneAngleMeasure |
Degree of horizontal (in the X-axis of the LocalPlacement) blade set from the centerline. |
|
| CoreSetVertical | IfcPropertySingleValue | IfcPlaneAngleMeasure |
Degree of vertical (in the Y-axis of the LocalPlacement) blade set from the centerline. |
|
| HasIntegralControl | IfcPropertySingleValue | IfcBoolean |
If TRUE, a self powered temperature control is included in the AirTerminal. |
|
| FlowControlType | IfcPropertyEnumeratedValue | PEnum_AirTerminalFlowControlType |
Type of flow control element that may be included as a part of the construction of the air terminal. |
|
| HasSoundAttenuator | IfcPropertySingleValue | IfcBoolean |
If TRUE, the object has sound attenuation. |
|
| HasThermalInsulation | IfcPropertySingleValue | IfcBoolean |
If TRUE, the air terminal has thermal insulation. |
|
| NeckArea | IfcPropertySingleValue | IfcAreaMeasure |
Neck area of the air terminal. |
|
| EffectiveArea | IfcPropertySingleValue | IfcAreaMeasure |
Effective discharge area of the air terminal. |
|
| AirFlowrateVersusFlowControlElement | IfcPropertyTableValue | IfcPositiveRatioMeasure/IfcVolumetricFlowRateMeasure |
Air flowrate versus flow control element position at nominal pressure drop. |