7.4.4.32 Pset_ElectricFlowStorageDeviceTypeCommon
7.4.4.32.1 Semantic definition
The characteristics of the supply associated with an electrical device occurrence acting as a source of supply to an electrical distribution system NOTE: Properties within this property set should ONLY be used in circumstances when an electrical supply is applied. The property set, the properties contained and their values are not applicable to a circumstance where the sypply is not being applied to the eletrical system or is temporarily disconnected. All properties within this property set are considered to represent a steady state situation.
7.4.4.32.2 Applicable entities
7.4.4.32.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| Reference | IfcPropertySingleValue | IfcIdentifier |
Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used. |
|
| Status | IfcPropertyEnumeratedValue | PEnum_ElementStatus |
Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
|
| NominalSupplyVoltage | IfcPropertySingleValue | IfcElectricVoltageMeasure |
The nominal voltage of the supply. |
|
| NominalSupplyVoltageOffset | IfcPropertyBoundedValue | IfcElectricVoltageMeasure |
The maximum and minimum allowed voltage of the supply e.g. boundaries of 380V/440V may be applied for a nominal voltage of 400V. |
|
| NominalFrequency | IfcPropertySingleValue | IfcFrequencyMeasure |
The nominal frequency of the supply. |
|
| ConnectedConductorFunction | IfcPropertyEnumeratedValue | PEnum_ConductorFunctionEnum |
Function of the conductors to which the load is connected. |
|
| ShortCircuit3PoleMaximumState | IfcPropertySingleValue | IfcElectricCurrentMeasure |
Maximum 3 pole short circuit current provided at the point of supply. |
|
| ShortCircuit3PolePowerFactorMaximumState | IfcPropertySingleValue | IfcReal |
Power factor of the maximum 3 pole short circuit current provided at the point of supply. |
|
| ShortCircuit2PoleMinimumState | IfcPropertySingleValue | IfcElectricCurrentMeasure |
Minimum 2 pole short circuit current provided at the point of supply. |
|
| ShortCircuit2PolePowerFactorMinimumState | IfcPropertySingleValue | IfcReal |
Power factor of the minimum 2 pole short circuit current provided at the point of supply. |
|
| ShortCircuit1PoleMaximumState | IfcPropertySingleValue | IfcElectricCurrentMeasure |
Maximum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
|
| ShortCircuit1PolePowerFactorMaximumState | IfcPropertySingleValue | IfcReal |
Power factor of the maximum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
|
| ShortCircuit1PoleMinimumState | IfcPropertySingleValue | IfcElectricCurrentMeasure |
Minimum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
|
| ShortCircuit1PolePowerFactorMinimumState | IfcPropertySingleValue | IfcReal |
Power factor of the minimum 1 pole short circuit current provided at the point of supply i.e. the fault between 1 phase and N. |
|
| EarthFault1PoleMaximumState | IfcPropertySingleValue | IfcElectricCurrentMeasure |
Maximum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
|
| EarthFault1PolePowerFactorMaximumState | IfcPropertySingleValue | IfcReal |
Power factor of the maximum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
|
| EarthFault1PoleMinimumState | IfcPropertySingleValue | IfcElectricCurrentMeasure |
Minimum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
|
| EarthFault1PolePowerFactorMinimumState | IfcPropertySingleValue | IfcReal |
Power factor of the minimum 1 pole earth fault current provided at the point of supply i.e. the fault between 1 phase and PE/PEN. |
|
| MaximumInsulatedVoltage | IfcPropertySingleValue | IfcElectricVoltageMeasure |
The max voltage that the insulation would operate normally |
|
| RatedCapacitance | IfcPropertySingleValue | IfcElectricCapacitanceMeasure |
Capacitance value determined under specified conditions and declared by the manufacturer. |
|
| PowerCapacity | IfcPropertySingleValue | IfcElectricChargeMeasure |
Power capacity of the equipment |