8.10.4.16 Pset_MechanicalBeamOutOfPlane

A measure of the Young's modulus of elasticity of the material.

Elastic modulus, minimal value, α=0°.

Elastic modulus, mean value, α=90°.

Elastic modulus, minimal value, α=90°.

A measure of the shear modulus of elasticity of the material.

Shear modulus, minimal value.

Defining values: α; defined values: bending strength.

Indicates the ability to withstand breakage apart under applied force.

Tensile strength, α=90°.

Compressive strength, α=0°.

Compressive strength, α=90°.

Alternative value for compressive strength, α=90°, which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.

Defining values: α; defined values: shear strength.

Shear strength in torsion.

Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.

Defining values: slenderness ratios; defined values: either factors or divisors of the strength, depending on the design method (if <1: factors, if >1: divisors).