7.6.4.10 Pset_SanitaryTerminalTypeCommon
7.6.4.10.1 Semantic definition
Common properties for sanitary terminals.
7.6.4.10.2 Applicable entities
7.6.4.10.3 Properties
Name | Property Type | Data Type | Description | |
---|---|---|---|---|
Reference | IfcPropertySingleValue | IfcIdentifier |
Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used. |
|
Status | IfcPropertyEnumeratedValue | PEnum_ElementStatus |
Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
|
NominalLength | IfcPropertySingleValue | IfcNonNegativeLengthMeasure |
The nominal overall length of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. |
|
NominalWidth | IfcPropertySingleValue | IfcNonNegativeLengthMeasure |
The nominal overall width of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. |
|
NominalDepth | IfcPropertySingleValue | IfcNonNegativeLengthMeasure |
Nominal or quoted depth of the object measured from the inlet drain connection to the base of the unit. |
|
Colour | IfcPropertySingleValue | IfcLabel |
Stratum colour |