7.6.4.13 Pset_SanitaryTerminalTypeSink
7.6.4.13.1 Semantic definition
Waste water appliance for receiving, retaining or disposing of domestic, culinary, laboratory or industrial process liquids. HISTORY: In IFC4, Material property removed. Use materials capabilities from IfcMaterialsResource schema. Datatype of color changed to IfcLabel (still a string value). SinkMounting changed to Mounting.
7.6.4.13.2 Applicable entities
- IfcSanitaryTerminal/SINK
- IfcSanitaryTerminalType/SINK
7.6.4.13.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| SinkType | IfcPropertyEnumeratedValue | PEnum_SinkType |
Selection of the type of sink from the enumerated list of types where:- Belfast: Deep sink that has a plain edge and a weir overflow . Bucket: Sink at low level, with protected front edge, that facilitates filling and emptying buckets, usually with a hinged grid on which to stand them. Cleaners: Sink, usually fixed at normal height (900mm), with protected front edge. Combination_Left: Sink with integral drainer on left hand side . Combination_Right: Sink with integral drainer on right hand side . Combination_Double: Sink with integral drainer on both sides . Drip: Small sink that catches drips or flow from a faucet . Laboratory: Sink, of acid resisting material, with a top edge shaped to facilitate fixing to the underside of a desktop . London: Deep sink that has a plain edge and no overflow . Plaster: Sink with sediment receiver to prevent waste plaster passing into drains . Pot: Large metal sink, with a standing waste, for washing cooking utensils . Rinsing: Metal sink in which water can be heated and culinary utensils and tableware immersed at high temperature that destroys most harmful bacteria and allows subsequent self drying. . Shelf: Ceramic sink with an integral back shelf through which water fittings are mounted . VegetablePreparation: Large metal sink, with a standing waste, for washing and preparing vegetables . |
|
| Mounting | IfcPropertyEnumeratedValue | PEnum_SanitaryMounting |
The property enumeration Pset_SanitaryMountingEnum defines the forms of mounting or fixing of the sanitary terminal that may be specified within property sets used to define sanitary terminals (WC’s, basins, sinks, etc.) where:- BackToWall: A pedestal mounted sanitary terminal that fits flush to the wall at the rear to cover its service connections Pedestal: A floor mounted sanitary terminal that has an integral base CounterTop: A sanitary terminal that is installed into a horizontal surface that is installed into a horizontal surface. Note: When applied to a wash hand basin, the term more normally used is ‘vanity’. See also Wash Hand Basin Type specification. WallHung: A sanitary terminal cantilevered clear of the floor. Note that BackToWall, Pedestal and WallHung are allowable values for a bidet. |
|
| Colour | IfcPropertySingleValue | IfcLabel |
Stratum colour |
|
| DrainSize | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The size of the drain outlet connection from the object. |
|
| MountingOffset | IfcPropertySingleValue | IfcLengthMeasure |
For counter top mounted basins the vertical offset between the top of the sink and the counter top. |